ATG Tapes are pressure sensitive adhesive tapes designed for usein hand-held ATG 700 Applicators. Using ATG Tapes saves time and minimises effort needed to apply strips and spots of adhesive compared with conventional double sided tapes. ATG Tapes are often a cleaner and more convenient alternative to liquid gluesand pastes.

Scotch® 924 General Purpose
ATG Tape all purpose product particularly suitable for bonding uncoated papers. Acid free or pH neutral for long term mounting of prints and photographs.
6.4/ 12.7/ 19mm x 33m12.7/ 19mm x 55m

Scotch® 926 High Performance
ATG Tape high strength, high temperature and solvent resistant transfer tape that will bond most surfaces.
12.7/ 19mm x 16.5m

Scotch® 928 Repositionable
ATG Tape double coated tissue with Post-it™ Adhesive on one side and general purpose on the other. Designed for temporary bonds and reclosable applications.
12.7/ 19mm x 16.5m

Scotch® 969 Extra High Tack
ATG Tape with good adhesion to “difficult to bond” materials like polyethylene and polypropylene. Plasticiser resistant for use on flexible PVC.
12.7/ 19mm x 16m

Scotch® 976 Extra High Tack
thinner version of 969. Particularly suitable for use on glossy or coated papers and films.
12.7/ 19mm x 33m

Tiki-Tape have available various types of double-sided tapes,from general purpose to more specialised applications.

#401 Double-Sided has a tissue paper carrier, a permanent acrylic adhesive. Has excellent quick stick and holding powerand is suitable for joining papers, card, cloths, plastics, foamsand metals. All rolls are individually wrapped, stocked in a wide range of sizes.
3/ 6/ 9/ 12/ 15/ 18/ 24/ 36/ 48/ 500mm x 33m

#456 Adhesive Transfer Tape is a high quality adhesive transfer tape, eliminating the need for staples or glue. Suitable forbonding papers, card, plastics or cloths. #456 is a thin layer of self-adhesive film with a paper release liner that can be applied either by hand or with an adhesive transfer gun. Used to make almost any surface self-adhesive, suitable for fixing papers and films onto walls or windows, name plate mounting, preparationof sample books and photograph albums. Foam Tapes are also available in various sizes, lengths and thicknesses.
12/ 19mm x 33m

Transfer tapes apply a thin strip of double sided adhesive cleanly and precisely.

4406 Removable AT is suitable for temporarily attaching signage,displays etc.

4456 Is designed for permanent application.

12/ 19mm x 33m
can be dispensed from the easy to use 1017 AT gun.

A wide range of tapes designed to adhere to almost any surface making them ideal for the fixing, bonding, joining and laminating to any substrate.

tesa #4959 is a paper tissue tape with an acrylic adhesive offering high initial tack. Excellent general purpose tape suitable for splicing and permanent mounting applications.

tesa #4965 has a clear polyester film carrier suitable for high temperature applications.

tesa #4970 has an extremely aggressive acrylic adhesive providing good shear strength and permanent bonding. Unaffected by plasticiser migration and light, age and temperature resistant. Adheres well to metals, plastic, leather, wood and most other materials.

18/ 24/ 36/ 48/ 300mm x 50cm#4970 is also available in 25m rolls.
Custom slitting to a required width size is available.

Tiki-Tape have available various types of double-sided tapes, from general purpose to more specialised applications.

#853 and #855 Carpet Tapes have a permanent adhesive on both sides. #853 has a polypropylene carrier and a white synthetic rubber adhesive. #855 has a cloth carrier and a white rubber adhesive. Both have good conformability to surfaces and high adhesive qualities. Suited for carpet and resilient flooring applications, #853 is also used for bonding plastic profiles and rubber stamp mounting.

# 853 50mm x 5/ 10/ 25m
# 855 25/ 50mm x 15m

#852 Carpet Tape has a cloth carrier, coated one side with a temporary adhesive, the other with a permanent adhesive. #852 has high conformability to surfaces and excellent adhesive qualities. Particularly suited for exhibition halls where temporary adhesion is required for easy removal.
# 852 50mm x 25m

These are tapes used for joining, bonding and splicing where gap filling between surfaces is not required.The primary thin products are:

9485 High strength, temperature and solvent resistant adhesive transfer tape that will bond to most surfaces. High performance product for more demanding applications.
12.7/ 19/ 25.4/ 50.8mm x 55m

465 All-purpose adhesive transfer tape particularly suitable for bonding uncoated papers. Acid free of pH neutral for long term mounting of prints or photographs.
12.7/ 19/ 25/ 50/ 305mm x 55m

950 Adhesive transfer tape with good adhesion to ‘difficult to bond’ materials like polyethylene and polypropylene. Plasticiser resistant for use on flexible PVC.
19/ 25.4/ 50.8 x 55m

A wide variety of quality double sided tapes for all applications.

1201 Double Sided Tissue is made with a strong adhesive on athin tissue carrier. Ideal for garment making and sailmaking.U.V stable.
18/ 24/ 36/ 48mm x 33m

1205 Double Sided Vinyl Tape the general purpose Double Sided tape. Made from a tough vinyl film coated both sides with a powerful adhesive.
6/ 9/ 12/ 15/ 18/ 24/ 36/ 48/ 300mm x 33m

4403 Superbond super strong, super sticky double sided tapefor heavy duty applications.
12/ 18/ 24/ 36/ 48mm x 25m

5303 Powerbond the ultimate Double Sided Tape. This product is made from a solid mass of adhesive, without a filmic carrier. Ideal for long term heavy duty applications such as affixing signage or coachbuilding.
12/ 19/ 25mm x 50m

The Tapespec range of double-sided tapes and transfers cover practically every application imaginable. Free technical assistance is available to select the most suitable tape for the application.

Some common uses covered are:
Foam and Rubber Bonding 1359, 0402, 1392
Paper and Cardboard 0402, 1205, 1459, 1359, 2325, NR100

Low Surface Energy Plastics 1397, 2161, 1125
Posters and Displays 1331, 2325, Superdots
Permanent Foam Mounting 1811, 1816, 9012, 5464

Ultra High Bond Construction/Engineering Grades
3006, 3011, 3016, 3708, 3406, 3410

Carpet Tapes 1450, 1392
Laminating Nitto 500, 1396, 0402, all transfers

The majority of the above tapes are available slit to the exact width required and run at various lengths.

Self-adhesive ‘Glue dots on a roll’. The quick clean and cost effective answer for: Print finishers, direct mail houses, production assembly lines, mounting posters and displays, attaching samples to magazines etc .....

- No expensive equipment needed
- No warm up or set up costs- Safe
- No burns or fumes
- FDA Approved for food areas

- Available in 3 pack sizes
* 1000/ 2000/ 5000 dots per dispenser

- 3 grades available to suit your application
* Easy tack for easy removal
* Mid tack removable but with good adhesion
* Ultra tack permanent

Double Coated Foam Tapes 4008, 4026, 4032, 4085 for lightweight, indoor mounting applications where gap-filling is helpful for joining materials which are not close fitting or have irregular surfaces. 3M Double Coated Foam Tapes fill gaps and distribute stress over the bonded area. Depending on specific tape, the result is a flexible foam bond line that seals, cushions and damps vibration, resists impact, withstands a good temperature range and provides good insulation qualities.

VHB Tapes are able to form exceptionally strong bonds. They have greater durability and elasticity than conventional double-coated tapes. VHB Tapes are available in three distinct groups:

General Purpose: Products are ideal for many interior and exterior industrial applications. Their performance is signifi cantly higher than urethane and other foam tapes.They have conformable cores and are especially suited for textured surfaces or applications where sealing is required.

High Performance: Products have higher core strength than general-purpose products and should be selected for more demanding applications involving dynamic (moving) loads. The foam core can absorb significant vibration and movement.

Special Feature: Products have special performancecharacteristics with products suitable for:

-Cold temperature application
-Bonding parts prior to powder coating
-Application onto paints and plastics
-Conformable products for applications requiring sealing

4032 12.7/ 19/ 25.4mm x 66m
4026 12.7/ 19/ 25.4mm x 33m
4085 12.7/ 19/ 25.4mm x 66m
4008 50mm x 33m

Danco # 4952 is a 1mm thick Double-sided White PE Foam Tape, with a strong acrylic adhesion suitable for permanent mounting on almost any surface. Excellent adhesion for uneven surfaces and moisture, age and UV resistant.

6mm to 1000mm x 25m

Also available in longer length bobbin rolls.

A comprehensive range of butyl sealants are available from Inseal by Sellotape. Butyl sealant tapes are used in glazing, marine, automotive, building and roofing industries for creating longlasting water tight seals.

9/ 12/ 19/ 25/ 50/ 60/ 100mm x 15/ 20/ 22.5/ 30/ 45m

The tesa foam tape range is manufactured to perform to a high standard across a wide variety of sealing and bonding applications. Foam tapes can be used to seal out moisture, dust, drafts, light and insects, eliminate or reduce noise and vibration and provide impact resistance, cushioning and protection.

Available in: various densities and thicknesses from 1.0mm to 19mm thick, and slit to customer requirements (6mm–1400mm)

Inseal from Sellotape. A range of single-sided and double-sided, self-adhesive foam tapes. The single-sided foams are excellent for water, air and dust sealing, for filling, cushioning, protecting, anti-vibration and acoustic sealing. The double-sided foams are ideal for bonding, mounting, fixing and joining.

Thickness 0.8mm - 25mm
Width 6mm - 1000mm
Length 5m - 60m

Dual Lock™ consists of two lengths of plastic strip with mushroom shaped stems that engage together with pressure. An audible ‘snap!’ announces that the fastener is locked. Excellent tensile strength means that unsightly mechanical fasteners can be replaced in many applications. Dual Lock Fasteners can be opened and reclosed many hundreds of times. Dual Lock is adhesive backed for fast easy application. Please contact your nearest Paklink branch for specific information on the adhesive backing available.

Dual Lock is packed in Mini Packs for convenience of use. There are two 25.4 wide and 4.5m long mating rolls of Dual Lock in each mini pack. Bulk packs of dual lock are also available on firm order only.

Dual Lock™ Low Profile works on the same principle as standard Dual Lock. The differences between Dual Lock Low Profile and standard Dual Lock are:

* Dual Lock Low Profile is less than half the thickness of standard Dual Lock, when the two parts are assembled.

* Dual Lock Low Profile can withstand up to 100 opening and closings, compared to many hundreds of times for standard Dual Lock.

* Dual Lock Low Profile is lower cost than standardDual Lock.

Dual Lock Low Profile provides a lower cost alternative in applications where the higher opening and closing feature of standard Dual Lock is not required or the extra thickness is not desirable.

Dual Lock Low Profile is available in:
16mm x 23m (3 rolls/ carton)
25.4mm x 23m (2 rolls/ carton)